Rhonmac-cnc
If the contents page does not show to the left of this window click, Contents Page Here
|
Now you can Buy using Debit or Credit Cards through Paypal, you do not need a Paypal account.         |
CNC Machines:
Small CNC Lathe:
BL730CNC
This cnc lathe comes ready converted for cnc use.
| Specification |
| Capacity 180mm dia swing, 300mm between centres. |
| Precision Trapezoidal Lead Screws, 16mm on z axis, 12mm on x axis. Lead screw cover. not shown. |
| Stepper motor drives to both x and z axis, drives enclosed for operator protection and to protect drive from swarf. |
| Quick change tool post with 5 tool holders, extra tool holders available. |
| Variable speed drive to spindle 0-2500 rpm. |
| Controller, 2 axis stepper motor driver 40Vdc at 4.2 amps per phase with built in power supply. |
| Nema 23 stepper motors 220Ncm holding torque. |
| Splash back and drip tray, optional stand available £100.00 |
Price/ machine Options Below
| Kit of parts and using your standard lead screws and nuts |
Enquire for kit price |
| Kit of parts but upgrading to Precision Trapezoidal Lead Screws for both axes |
Enquire for kit price |
|
Complete machine ready to use £1889.00 |
PC and software not included
Bench CNC Mill
BM2050CNC
A 3 axis cnc bed type milling machine, converted to enable 3 axis cnc milling.
| Specification |
| Precision Trapezoidal lead screws and nuts are 16mm on all 3 axes. |
| Table capacity |
| Table axis movement |
| Capacity under head |
| Z axis movement |
| Motor capacity/variable speeds |
| Maximum milling cutter |
| Controller, 3 axis stepper motor driver 40Vdc at 4.2 amps per phase with built in power supply. |
| Nema 23 stepper motors 220Ncm holding torque. |
| Drip tray included. |
| Stand optional £100.00 (price when purchased with machine) |
Price/ machine Options Below
| Kit of parts and using your standard lead screws and nuts | Enquire for kit price |
| Kit of parts but upgrading to Precision Trapezoidal Leadscrews and Nuts for all 3 axes | Enquire for kit price |
|
Complete machine ready to use £2759.00 |
PC and software not included
Our policy is one of continual improvement therefore specifications may change without notice. Pictorial representations are intended as a guide only and may vary depending on machine model or product offered.